New Arrival
WPL WPLB-14 1:16 2.4G 4WD RC Military Truck Off Road Car With Light RTR
WPL WPLB-14 1:16 2.4G 4WD RC Military Truck Off Road Car With Light RTR
RM159.00  
Servo and ESC Tester ( Multi-tester)
Servo and ESC Tester ( Multi-tester)
RM  60.00  40.00  
PC1200 1200Watt 10~30V 50Amp max DC Switching Power Supply (110V ~ 240V)
PC1200 1200Watt 10~30V 50Amp max DC Switching Power Supply (110V ~ 240V)
RM1,099.00  
Vaterra Ascender 1/10 4WD Scale Truck Kit w/1986 Blazer K-5 Body
Vaterra Ascender 1/10 4WD Scale Truck Kit w/1986 Blazer K-5 Body
RM1,599.00  
Spektrum RC FPV Headset w/4.3" Video Monitor
Spektrum RC FPV Headset w/4.3" Video Monitor
RM599.00  
Castle Creations 20A BEC Pro Voltage Regulator V2
Castle Creations 20A BEC Pro Voltage Regulator V2
RM195.00  
Castle Creations BEC 10A
Castle Creations BEC 10A
RM120.00  
Hyperion CC3D Revo 32bit STM32 F4 Flight Controller
Hyperion CC3D Revo 32bit STM32 F4 Flight Controller
RM269.00  
OpenPilot CC3D 32 Bit Flight Controller
OpenPilot CC3D 32 Bit Flight Controller
RM125.00  
RC Car 1:26 Concrete Mixer Truck
RC Car 1:26 Concrete Mixer Truck
RM139.00  
Hyperion 1KG Precision Pocket Scale ( 0.1 gram intervals)
Hyperion 1KG Precision Pocket Scale ( 0.1 gram intervals)
RM50.00  
Fullymax 0900mah 3S 30~60C Lipo Pack
Fullymax 0900mah 3S 30~60C Lipo Pack
RM67.00  
FlySky FS-i6X 10 Channel Radio w/receiver (Mode 2)
FlySky FS-i6X 10 Channel Radio w/receiver (Mode 2)
RM299.00  
FlySky FS-iA10B 2.4Ghz 10 Channels Receiver
FlySky FS-iA10B 2.4Ghz 10 Channels Receiver
RM80.00  
FlySky FS-iA6 2.4Ghz 6 Channels Receiver
FlySky FS-iA6 2.4Ghz 6 Channels Receiver
RM60.00  
R/C Leopard 2A7 Tank 1:48 Land Panzer Armor Military Model
R/C Leopard 2A7 Tank 1:48 Land Panzer Armor Military Model
RM75.00  
WINYEA Speed Truck KX7 2.4G Radio Control 1:14 scale
WINYEA Speed Truck KX7 2.4G Radio Control 1:14 scale
RM109.00  
GT Power LP-GUARD Lipo Battery Protective Bag Protection Explosion-Proof Bag
GT Power LP-GUARD Lipo Battery Protective Bag Protection Explosion-Proof Bag
RM45.00  
GT Power A3 PRO 2A 16W AC Charger For 2-3S Lipo
GT Power A3 PRO 2A 16W AC Charger For 2-3S Lipo
RM70.00  
FMS 1220MM Super EZ PNP
FMS 1220MM Super EZ PNP
RM  749.00  499.00  
FMS 70MM EDF Avanti Blue (4S version) PNP
FMS 70MM EDF Avanti Blue (4S version) PNP
RM960.00  
Blade Nano QX 3D RTF Micro Electric Quadcopter w/2.4GHz Radio, Battery & Charger
Blade Nano QX 3D RTF Micro Electric Quadcopter w/2.4GHz Radio, Battery & Charger
RM  599.00  399.00  
Blade Helis Nano CP S RTF Electric Helicopter w/SAFE & 2.4GHz Radio System
Blade Helis Nano CP S RTF Electric Helicopter w/SAFE & 2.4GHz Radio System
RM699.00  
ECX Barrage 1.9 1/12 4WD RTR Electric Crawler
ECX Barrage 1.9 1/12 4WD RTR Electric Crawler
RM999.00  
Vaterra Twin Hammers DT 1.9 1/10 4WD Desert Truck RTR
Vaterra Twin Hammers DT 1.9 1/10 4WD Desert Truck RTR
RM1,799.00  
We Absorb GST 6% for all our products!
Home > Products > Charger & Accessories > Charger (DC Only) > GT Power C6 1-6S Balance Charger 6A/50W
GT Power C6 1-6S Balance Charger 6A/50W

GT Power C6 1-6S Balance Charger 6A/50W

Rating: 0 out of 100 - based on 0 review(s) | Write Review | Add to Compare
RM109.00  
Item details
SKU: GT-C6
Weight: 1 kg, 0 grams
Stock: Stock available

Brand: GT Hobbies
  Add To Facebook   Add To MySpace

Specifications
Operating Voltage Range: DC 10 - 18V
Circuit Power: Max. 50W for charging, Max. 5W for discharging
Charge Current Range: 0.1 - 6.0A
Discharge Current Range: 0.1 - 1.0A
Current drain for balancing Li-po: 300mAh/cell
NiCd/NiMH battery cell count: 1 - 15 Cells
Lithium Battery Cell Count: 1 - 6 Series
Pb Battery Voltage: 2 to 20V
Dimensions: 137mm x 98mm x 30mm



Features
Optimized operating software
When charging or discharging, It has an `AUTO` function that sets the feeding current automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option.

Special recharge plugs  for receiver, transmitter and igniter charger. And for frequently used charger port such as multi purpose crocodile pin etc.

It provides most convenient balance charge port for Lithium batteries, with separated 3,4,5,6 charge port, and external reverse connector.

High-power and high-performance circuit
It employs the circuit that has maximum output power of 50W. As a result it can charge or discharge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 6.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CUP or the operating program.

Individual voltage balancer for Lithium batteries inside
It has an individual-cell-voltage balancer inside. This does not require any extra balancer separately when charging Lithium batteries (Lilo/LiPO/LiFe) for cell voltage balancing.

Balance individual cells on discharge
It also can monitor and balance individual cells of the Lithium battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

Accept various types of Lithium battery
It can accept three types of Lithium batteries - Lilo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer `Warnings and safety notes` section.




Lithium battery `Fast` and `Storage` mode
You can charge Lithium battery for special purposes. `Fast` charge reduces the charging time of Lithium battery and `storage` mode controls the final voltage of the battery to be suit for long time storage.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH)

Auto-charge current limit: When charging NiCd or NiMH at `AUTO` current mode, you can set the upper limit of change current to avoid from high current charging. This is very useful when charging the low impedance and small capacity NiMH battery in `AUTO` mode.

Capacity limit: The changing capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.

Processing time limit: you can also restrain the maximum process time to prevent form any possible defect.

Input power monitor: To protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops below the lower limit the process will be ended automatically.

Automatic cooling fan: The electric cooling fan comes into action automatically only when the internal temperature of the unit is raised.

Data store / load
For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

Cyclic charging / discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.