DUAL INPUT(AC/DC) AC Supply INCLUDED
Optimised Operating Software
When charging or discharging, it has an 'AUTO' function that sets the feeding current automatically. Especially for Lithium batteries, it can prevent the over-charing can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at uses option.
Special recharge plugsport for receiver, transmitter, and igniter charger. And for frequently used charger port such as multi purpose crocodile pin etc.
High-power and High-performance Circuit
It employs the circuit that has maximum output power of 50W. As a result it can charge or discharge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 6.0A. Furthermore the colling system is so efficient that can hold such a power without trouble of running the CPU or the operating program.
Individual Voltage Balancer for Lithium Batteries Inside
It has an individual-cell-voltage balancer inside. This does not require any extra balancer separately when charging Lithium batteries (Lilo/LiPo/LiFe) for cell voltage balancing.
Balance Individual Cells on Discahrge
It also can monitor and balance individual cells of the Lithium Battery pack during discharging process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.
Accept Various Type of Lithium Battery
It can accept three types of Lithium batteries - Lilo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.
Lithium Battery 'Fast' and 'Storage' Mode
'Fast' cahrge reduces the charging time of the Lithium battery and 'Storage' mode controls the final voltage of the battery to be suited for long time storage.
- Delta-peak sensitivity
- Auto-charge Current Limit
- Capacity Limit
- Temperature Limit
- Processing Time Limit
- Input power Monitor
- Automatic cooling fan
For user's convenience, it can store a maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.
Perform 1 to 5 cycles of charge > discharge or discharge > charge continually for battery refreshing and balancing.
Dual Input Power AC: 100 - 240V
DC: 11 - 18V
Circuit Power max. 50W for charging
max. 5W for discharging
Charge Current Range 0.1 - 6.0A
Discharge Current Range 0.1 - 1.0A
Current Drain for Balancing Li-Po 300mAh/cell
NiCd/NiMH Battery Cell Count 1 - 15 cells
Lithium Battery Cell Count 1 - 6 series
Pb Battery Voltage 2 - 20V